Beko Error Codes
Every Beko error code we have catalogued, with what it means on site — 30 codes in total. In R-Pro, tap any code to get the meaning, likely causes and inspection steps, even with no signal in the plant room.
30 codes
| Code | What it means |
|---|---|
| E1 | Indoor unit temp sensor fault |
| E2 | Evaporator coil sensor fault |
| E3 | Compressor desync/overload |
| E4 | Compressor discharge sensor fault |
| E5 | Indoor/outdoor comm error |
| 1E | Outdoor air sensor fault |
| 2E | Condenser temp sensor fault |
| EC | Refrigerant leakage detection |
| EE | EEPROM parameter error |
| Ff01 | Indoor room sensor malfunction |
| Ff02 | Indoor coil sensor malfunction |
| Ff03 | Condenser temp rise (cooling) |
| Ff04 | Condenser temp rise (heating) |
| Ff05 | Outdoor exhaust sensor fault |
| Ff06 | Indoor fan motor issue |
| Ff07 | Room sensor fault (alternative) |
| Ff08 | Evaporator sensor fault (alternative) |
| Ff09 | Defrost sensor fault |
| F1 | Indoor ambient sensor short/open |
| F2 | Evaporator sensor short/open |
| F3 | Outdoor ambient sensor short/open |
| F4 | Condenser sensor short/open |
| P4 | Inverter compressor drive error |
| P5 | System overcurrent protection |
| Ed | Outdoor general fault lockout |
| H1 | Auto-defrost mode (normal) |
| H6 | Indoor fan motor no feedback |
| U8 | PG fan zero-crossing error |
| C5 | Jumper cap malfunction/missing |
| L1 | Low voltage protection |
Official Beko source / manual ↗
Look up any error code — offline — in R-Pro.
Open R-Pro →