Kentatsu Error Codes
Every Kentatsu error code we have catalogued, with what it means on site — 25 codes in total. In R-Pro, tap any code to get the meaning, likely causes and inspection steps, even with no signal in the plant room.
25 codes
| Code | What it means |
|---|---|
| E1 | Room sensor (std) / EEPROM error (inverter) |
| E2 | Evaporator sensor / zero-crossing error |
| E3 | Condenser sensor / indoor fan abnormality |
| E4 | Outdoor sensor / inverter comp drive error |
| E5 | Indoor/outdoor comm error |
| E6 | External unit protection/malfunction |
| E10 | Compressor suction pressure issue |
| E13 | Compressor phase sequence fault |
| E14 | Compressor phase loss |
| P0 | IPM protection |
| P1 | Over/under voltage protection |
| P2 | Compressor top overheat protection |
| P4 | Evaporator temp protection |
| P5 | Condenser temp protection |
| P7 | Discharge temp too high |
| P9 | Low outside temp / defrost |
| P10 | Discharge pressure protection |
| P11 | Suction pressure protection |
| P12 | Overcurrent protection |
| F1 | Outdoor ambient sensor fault |
| F2 | Outdoor condenser coil sensor fault |
| F3 | Compressor discharge sensor fault |
| F4 | Outdoor EEPROM malfunction |
| F5 | Outdoor fan speed abnormality |
| H3 | Compressor overload protection |
Official Kentatsu source / manual ↗
Look up any error code — offline — in R-Pro.
Open R-Pro →