Midea Error Codes
Every Midea error code we have catalogued, with what it means on site — 20 codes in total. In R-Pro, tap any code to get the meaning, likely causes and inspection steps, even with no signal in the plant room.
20 codes
| Code | What it means |
|---|---|
| E0 | EEPROM parameter error |
| E1 | Indoor/outdoor communication error |
| E3 | Indoor fan speed out of control |
| E4 | Indoor room temp sensor (T1) error |
| E5 | Evaporator coil temp sensor (T2) error |
| EC | Refrigerant leakage detection |
| EE | Water level alarm (cassette/ducted) |
| E8 | Communication fault between twin indoor units |
| F0 | Overload current protection |
| F1 | Outdoor ambient temp sensor (T4) error |
| F2 | Condenser coil temp sensor (T3) error |
| F3 | Compressor discharge temp sensor (TP) error |
| F4 | Outdoor EEPROM parameter error |
| F5 | Outdoor fan speed out of control |
| P0 | IPM malfunction / IGBT overcurrent |
| P1 | Over/under voltage protection |
| P2 | IPM / compressor top high temp protection |
| P4 | Inverter compressor drive error |
| P5 | Indoor units mode conflict (multi-split) |
| P6 | Compressor low pressure protection |
Official Midea source / manual ↗
Look up any error code — offline — in R-Pro.
Open R-Pro →