Winia (Daewoo) Error Codes
Every Winia (Daewoo) error code we have catalogued, with what it means on site — 20 codes in total. In R-Pro, tap any code to get the meaning, likely causes and inspection steps, even with no signal in the plant room.
20 codes
| Code | What it means |
|---|---|
| E0(실내) | Indoor EEPROM chip error / corrupted data |
| E1(실내) | Indoor–outdoor communication fault |
| E2(실내) | Zero-crossing detection error |
| E3(실내) | Fan speed abnormality |
| E6(실내) | Room temperature sensor malfunction |
| E0(실외) | Outdoor EEPROM chip error / corrupted data |
| E1(실외) | Pipe temperature sensor 1 fault |
| E2(실외) | Pipe temperature sensor 2 fault |
| E3(실외) | Pipe temperature sensor 3 fault |
| E4(실외) | Outdoor ambient temperature sensor fault |
| E5(실외) | Over/under voltage protection |
| E6(실외) | Indoor pipe temperature sensor malfunction |
| E7(실외) | Indoor–outdoor communication failure |
| P0 | IPM module defect / protection |
| P1 | High-pressure protection |
| P2 | Compressor temperature protection |
| P3 | Compressor current protection |
| P4 | Inverter module protection |
| P5 | Outdoor low-temperature protection |
| P6 | Condenser overheating protection |
Official Winia (Daewoo) source / manual ↗
Look up any error code — offline — in R-Pro.
Open R-Pro →